1, folding door accessories which 1, rail, the best choice of 304 stainless steel, other materials in the use of easy to rust. Falling off and so on. Hinge, made of copper, iron, stainless steel, etc. . The thickness is 16-20 mm. Users can be based on the actual situation. 3, pull, the main role is easy to push and pull. Handle style, type, shape changes, strong decorative. 4, move the door crane wheel, determine the service life. The utility model comprises a pulley block and a connecting piece, which are composed of a fixing piece and a moving piece.2. How to install a folding door 1. Determine the location, first we install a folding door to determine the location of installation, if it is used as a kitchen door or toilet door, it should be installed in the middle of the door frame; if it is used as a living room partition, to determine a good position, leave space for the corresponding line length, and then make sure the length of the track is correct, if the track is longer, use a ruler to measure the length, make a mark, use a hacksaw to cut off the growing part, take Care Not to let the iron filings fall into the track, so as not to affect the sliding of the door.
2. Insert the folding door, pick up the slide, insert the folding door into the slide when it is tied up, push it to the middle of the slide, which is more convenient to install when it is tied up, and push it to the middle to prevent it from sliding when it is installed, fell off the chute. 3, fixed, before fixed, to confirm the direction of the handle, habit to the left or right to pull, according to custom select the corresponding direction, confirmed after the start of the installation track, in accordance with the order between the two sides after the first installation, with the impact drill will screw into the track and doorframe or wall, because doorframe or wall are relatively thick, simple screwdriver is difficult to screw into the screw, it is necessary to use the power of the impact drill, after installing the screw, untie the rope that ties the folding door. 4. Put in a rubber cover, pull the folding door open, compare the location of the magnet on the door to the location of the magnet plate installed on the wall or door frame, and after determining the location of each magnet plate, drill the hole with an impact drill to a depth of about 4 cm, then the rubber sleeve is punched into the hole, and then the rubber sleeve is punched into the hole in turn. 5. Fix The suction plate, push the folding door to the middle again, pick up the suction plate, align the holes on the suction plate with the plastic sleeve hole, screw the screw into the plastic sleeve with a screwdriver, until the suction plate is fixed, and fix each suction plate with the same steps, then pull open the folding door, there is no handle on the side with the suction plate suction, so that the installation of the folding door.
